T50 T70 Elevator Guide Rail Cold Drawing Bench Machines
Cold drawing bench machine is the key machine to produce elevator guide rail, the cold drawing dies are special designed to meet the section and size of elevator guide rail and get high quality finished products. The machine is with simple structure, low failure rate, easy to control, convenient to maintenance.
Main Parameter of T50 T70 Elevator Guide Rail Cold Drawing Bench Machine
Item |
Description |
LBJ-D65 |
DC motor, speed adjustable | ||
1 |
Rated drawing length (m) |
10 |
2 |
Rated drawing speed (m/min.) |
12 |
Speed adjusts range (m/min.) |
6~18 |
|
3 |
Rated drawing force (KN) |
650 |
Within speed range, the Min. drawing force (KN) |
440 |
|
Within speed range, the Max. drawing force (KN) |
660 |
|
4 |
Main drive |
|
(1) |
Motor type |
YVP315L2-6 |
Motor power (Kw) |
132 |
|
Motor speed (rpm) |
980 |
|
Motor brand |
Nanjin Kongte |
|
(2) |
Type of gear reducer |
QJS-D800 |
Brand |
Self Made |
|
5 |
Main transmission chain |
|
Pitch (mm) |
240 |
|
Chain plate (mm) |
20×150×400 |
|
Material of chain |
65Mn |
|
Material of chain pin |
40Cr |
|
6 |
Bed body |
Welded structure |
7 |
Drawing car return |
|
Car return speed (m/min) |
40 |
|
Return motor and power |
Y132M2-6/5.5KW |
|
8 |
Electric control |
Include in main electric control cabinet, operation box, not include in wire, wire pipe used at site |
Quote Information
Item |
Description |
1 |
Material of elevator guide rail |
2 |
Size range of elevator guide rail, better to show us the section drawing |
3 |
Length of each piece |
4 |
If you have special requirement, please indicate |
FAQ
1. Q: Do you offer customized machines?
A: Yes, we offer professional design.
2. Q: Besides cold drawing bench machine, is there any other machines required to produce elevator guide rail?
A: Yes. Pointing machine (swaging machine) and straightening machine are needed at the same time.
3. Q: Do you offer above said machines?
A: Yes
4. Q: What is the MOQ?
A: 1 set
5. Q: What is the delivery time?
A: Three to five months, depend on machine type.
6. Q: What is the payment terms?
A: TT, LC